Definitions

1. At high load, the spark is fired somewhat later, and the gas density in the combustion chamber is then too high for the spark to bridge a gap of 3.5 mm.
2. At high load, the valves does not open.

Components

1. A stoichiometric mixture unfortunately burns very hot and can damage engine components if the engine is placed under high load at this fuel air mixture.

Health

1. Stresslinux is a Mini Linux designed to test a computer's hardware by running the components at high load while monitoring their health.

Exhaust

1. The temperature of exhaust gas recirculated with the intake gases increases at high load and thus the temperature of the intake gases increases.

Internal Combustion

1. When an internal combustion engine is under high load (e.g.

Monitor

1. StressLinux is a minimalist Linux distribution dedicated to users who wish to test their system on high load and monitor its health.
2. StressLinux is a minimalist live CD distribution dedicated to users who want to test their systems on high load and monitor the health of these systems.

Compression Ratio

1. Together with the transfer of the high load drive, compression ratio.epsilon.

Knocking

1. In gasoline engines, the compression ratio is set relatively low in view of occurrence of knocking under high load.

High Rpm

1. At high rpm and high load conditions, the secondary injector is used to provide additional fuel [edit - to the secondary port].

High Speed

1. This involves fling the cylinder with a less than stoichiometric mixture under all but high speed, high load running conditions.
2. Consequently, when the engine 1 runs with a high load and at a high speed, the output of the engine 1 can be effectivelyincreased.

Spark Ignition Engines

1. On the other hand, in spark ignition engines at high load, swirl can increase knock tendency.

Place

1. During HCCI and high load operation there are problems, since the ignition takes place too early, due to an excessive raising of temperature.

Combustion

1. This results in an efficiency reduction at high load, reduced power output, and increased combustion heat transfer to the engine.
2. With regard to an Otto (gasoline) engine the problem of knocking during combustion or pre-ignition occurs at a high load.

Low Load

1. As a general rule, the spark is fired to the fixed electrode at low load and to the piston electrode at high load.
2. During a high speed or high load condition, it is possible to operate only the main fuel injector 58 as similar to the low speed or low load condition.
3. In an engine in which the overlapping period is designed to be longer at high load, there occurs a problem of flowing back of exhaust gas at low load.

High Load

1. It is beneficial to delay closing timing of exhaust valves for decreasing frequency of knocking to thereby enhance output power at low speed and high load.
2. It is dedicated to users who want to test their system(s) entirely on high load and monitor the health of these systems.
3. Broadcast messages can place a high load on a network since they force every host on the network to service them.

Categories

1. Low Load
2. Broadcast Messages
3. Spark Ignition Engines
4. High Speed
5. High Rpm
6. Books about "High Load" in Amazon.com
   

Continue: More Keywords - - - - - - - - - -